DIY: Cat Straws and Toothpicks!

So for Jessi’s bachelorette party, I decided to whip up these fun cat straws for a fun addition to our champagne limo ride.

These were fairly easy once I worked out the kinks. Let’s get to it!

photo_2-(2)

MATERIALS

Paper straws (I bought these cute striped straws from Target. They are cute on their own! And they were $2)
A few pieces of card stock
A pencil
Scissors
Metallic sharpie or some other marker you like
Circle punch
Hot glue or strong glue

steps-for-straws

INSTRUCTIONS

1. With your pencil, start by drawing a cat head shape on the backside of the card stock. You may want to try it out on a regular piece of paper first.

2. Once I drew my perfect shape, I cut out the cat head and used it as a template for the rest of them. Cut those cuties out!

3. Make little kitty faces using the sharpie.

3. Using the circle punch, cut out as many circles as you did cat heads.

4. Now glue just half of that tiny circle to the back of the cat head.

5. Put the straw under the circle. Now dot the other side of the circle and glue it down. I didn’t do it very tightly so I could adjust where the kitty was on the straw.

You’re all done! I will say that since they were adjustable, some girls at the party mentioned they were going to take the kitty with them and use them on different straws. The paper straws were cute, but they weren’t exactly long-lasting!

girls-with-straws!

Me, Jess, Jessi, and Mindy…. all ready with our straws… but where are our drinks?!

While you’re at it . . . make some smaller and glue them onto toothpicks! I also found some glittery hearts at Micheal’s that I added.

photo_2-(3)

There’s just something about toothpicks with things on top that make everything more festive! Here are our dessert blueberry muffins decked out at Jessi’s bridal shower:

IMG_9334

Check back soon for more details on the amazing weekend we had!

marlena-signature

Advertisements

DIY: Embellished Sunnies

photo_4

We’ve been seeing a lot of embellished sunglasses all over the place, usually with flowers (like this one, over at The Student Wardrobe). Today we’re bringing you our own version of the trend, using jewelry!

MATERIALS

Sunglasses
Earrings
Chain necklace
Glue gun & glue
Wire cutter/good scissors

embellished-sunglasses

HOW TO

Oh, the endless possibilities we can accomplish with a $4 glue gun! This is so easy: just remove the earring backs with a wire cutter, then glue the earrings in place! We really liked how the necklace chain wrapped around the lenses, too. Just glue along the edge and work the chain around, then where the chain ends we added each earring. Have fun with the placement; we did on the top corners, on the side, and the bottom. Be sure and clean off the little glue strings that inevitably get on the lenses.

Tips:

If you decide to put your earrings on the side, make sure you can open and close your sunglasses when you decide your placement.
Unfortunately, Jessi and I both experienced the casualty of these glasses when we threw them in our purses. The earrings popped off pretty easily, so make sure to handle with care!
IMG_2649
IMG_8629
photo(2)

Have fun and get creative!

both-signature

DIY: Sharpie Purse

DIYpurse=steps

I have an easy DIY for you today! So I bought this purse for Jessi for her b-day, but the more I looked at it, the more I kept thinking it needed something. Metallic triangles were the answer. In the end, I’d say my little project was a success: Jessi thought I bought it with the triangles! That’s the best compliment, right?

Materials Needed:

Something blank to design, like this soft fake leather purse
Metallic Sharpie permanent marker

Instructions:

This is so easy! Just take out that sharpie and get crazy with it. I think the simple shapes work best, but do whatever you please.

Pointer #1: The key to making this work is the material. I think this particular purse is some sort of fake leather, and the Sharpie just went on like… well… a permanent marker. I was going to put a topcoat finisher on it, but I didn’t think it was necessary. If you think it might smear, though, perhaps try one. I have a spray one that I got at Micheal’s.

Pointer #2: in my head the triangle pattern was less all over the place and more static, but let’s get real: drawing the same triangle exactly the same length apart all the time is hard. So random is way less stressful and it still turns out lovely!

Pointer/Random thought #3: If you don’t have a bag to draw on, just draw polka dots, stripes or cat silhouettes on your nails!

photo_2 triangle-purse-complete

Good luck, pretty kitties! Let me know if you tackle a project with a metallic sharpie, especially a purse!

marlena-signature

DIY: Mini Party Cat Hats!

main-photo-(65)

Mini party hats. Brilliant, right? No nasty string bugging your chin, and there’s something cuter about them cocked to one side. I had seen this image bouncing around on Pinterest and decided to spring into action for Jessi’s birthday party. Unfortunately I couldn’t find any further instructions than what the image said, so I definitely had my work cut out for me. But, dear kittens, I feel I prevailed (even if we did have to set up a “Party Hat Repair Station” during the festivities). Now that I know what did and didn’t work though, I’ll be able to share with you the best ways to make your own!

Let’s get started!

diy-materials

Materials:

card stock paper with your choice of pattern

Note: I couldn’t find the cat paper I was envisioning in my head, so I stalked party goers’ fb pages for their cats and then collaged them together in Photoshop. I love how it turned out!

writing utensil
party hat template (download this nifty one from Oh Happy Day! and then check out her cute blog)

Note: I was too lazy to print it out so I just sketched it and it came out fine. You’ll see I didn’t do the little flap on the side just because I thought it looked like more work, but it would have probably helped.

scissors
headbands
decorations, like pom-poms, fringe, crepe paper, stickers, garland, etc!
hot glue gun + glue
ribbon

Instructions:

Untitled-1

Step 1: Using your party hat template, trace the template onto your cat paper.

Step 2: Twist the paper to shape it into a little hat. I practiced on a few blank sheets first and I believe that helped. I just taped it shut on the seam. Some of the tricky ones I glued down with the glue gun. Note: if you think it’s too big, just adjust the size of your template by cutting the bottom portion.

Step 3: Decorate that hat! I glued everything onto the hat with the glue gun. Pom poms on top are a must! To make the fringe with the crepe paper, just glue lengthwise, the cut into strips. I say in this situation, the more festive the better! Just keep gluing. Start everything on the seam (see pic) so that way it will be nice and clean on all sides.

Step 4: Now comes the part that I found tricky: attaching it to the headband. At first I used the glue gun, which sort of worked, but then most of them fell apart at the party. SO: Jessi came up with how to attach them and it’s genius. Poke a hole on each side (I just used a regular ol’ ink pen). Now thread some ribbon through each side and tie to the headband. Do on both sides of the hat. This is genius because it (surprisingly) doesn’t fall off, AND because it’s adjustable on the headband. Note: I used ribbons so I could make cute little bows, but you can use a slew of things. During the party we had to think on our feet so we ended up using pipe cleaner and it worked like a charm!

Step 5: You’re done. Go wear that party hat with pride. Meow!

completed-party-hats

Us in our party hats!

Us in our party hats!

This is just the first post of our fun-filled birthday week! Stay tuned for our birthday party outfits and nummy birthday appetizer!

marlena-signature

DIY: Fun with Florals

all3

We have 3 fun and creative DIYs for you involving just a few materials. You can add a bit of whimsy to any outfit with these flower arrangements on your head or ears! You can go full blown flower crazy or go a little more reserved. We’ve made 2 different floral headpieces and an easy earring idea for you.

DSC00472title

The Flower Crown

materials needed:
an assortment of fake flowers (I used 3 large flowers and 3 smaller varieties but seriously the possibilities are endless)
green floral wire
black floral tape (optional)
wire cutters/scissors

how to:

steps1-3
step4

1. Take the floral wire and measure around your head once like a crown. I reinforced my crown base by doubling the wire.

2. Cut off the stems of the large flowers using wire cutters (note: it can be done with scissors if you are not wimpy like me). The small flowers you can just cut off close to the first bud so you have about 5-6 little buds on each stem.

3. Take the floral wire and wrap underneath the green leaf part of your large flowers.

4.Now wrap each flower around the crown base wherever you want them. I put the biggest flowers where I wanted them first. For the smaller flowers, just wrap around the stem with the wire, filling in the blank spots. Remember to make all the flowers wrap the same so they are all facing the same direction. Tip: Remember when you wrap the wire around the flower or stem to make sure the wire isn’t poking out or it will either get stuck in your hair or just hurt when you put it on! I totally made this mistake.

5. If you don’t go all the way around the crown, you can use the floral tape to wrap the base for a cleaner look, and it helps strengthen the wire.

6. Wear that beautiful crown of flowers!

The Flower Headband

materials needed:
an assortment of fake flowers (I used 1 large flower and 3 smaller varieties but again, the possibilities are endless)
green floral wire
wire cutters/scissors
blank metal headbands

how to:
headband-steps

1. {same as step 2 above} Cut off the stems of the large flowers using wire cutters. The small flowers you can just cut off close to the first bud so you have about 5-6 little buds on each stem.

2. Take the floral wire and wrap underneath the green leaf part of your large flowers and then wrap them around the headband wherever you want them. You’ll have to wrap them pretty tightly so they will stay, but I promise they will stay! I started with the large flower at the one side of the headband, then worked my way around with the smaller flowers. Remember to make all the flowers wrap the same so they are all facing the same direction.

3. Yay! Put that headband on, you look beautiful.

DSC00470

Our third DIY project with these flowers is an easy earring project.

DSC00469materials

*you may not need the wire, read on!

1. Cut off the flower stem right where the stem comes together.

2. Depending on the type of flower you happened to buy, you can either attach the jump ring to the green base of the flower (see figure 1) or you can use floral wire to make a circle to attach the jump ring to (see figure 2). Then simply hook the jump ring to the earring hook and you’re done! Wear those spring-y earrings with pride!

earrings-steps

We hope you enjoyed our first DIY project! Have fun with it and let your intuition take over. Let us know if you have any questions, especially if something doesn’t make sense. We’re here to help lovelies!

M&J

Our completed looks!

Our completed looks!